2T / H Water Filtration Machine For Well Water Sand Carbon Filter
Industry Purifier
Production Description
The main working principle of water softening equipment is to use
anion and cation softening. Let the raw water through the anion
converter, remove the water, calcium, magnesium, sodium ions. Out
of the water is just water molecules. No other molecules, then can
effectively prevent scale.
In the case of incoming water for deep well water or water source
hardness is very large, the use of water softening equipment is to
remove the calcium and magnesium ion content in the water, so that
the water calcium and magnesium ions to reduce. If there is no
water softener or water softener failure, calcium and magnesium
salts on the surface of the reverse osmosis membrane due to the
sharp increase in concentration and the formation of precipitates
insoluble in water, clogging the reverse osmosis membrane holes,
shortening the service life of the reverse osmosis membrane, and
increasing the maintenance cost of the equipment.
Functional advantage:
Anti-corrosion and anti-pollution: The bed of the softening
filtration equipment usually adopts anti-corrosion materials such
as glass fiber reinforced plastic (FRP), and the pipeline adopts
ABS engineering materials, which are highly corrosion-resistant and
can effectively solve the corrosion problem of the equipment. In
addition, the reasonable structure and compact design also reduces
the accumulation of pollutants and ensures the water quality.
Reasonable structure, easy to install: the overall design of the
softening filtration equipment is reasonable, covers a small area,
and the lightweight structure makes the equipment easy to install.
At the same time, the installation and commissioning process of the
equipment is very simple and can be flexibly arranged according to
the site conditions.
Reliable performance and stable operation: the softening filtration
equipment has been proved by long time practical application, its
operation performance is stable and reliable, its action is
sensitive and reliable, and no abnormal situation has ever
occurred. Coupled with perfect after-sales service and technical
support, the equipment is always kept in good running condition.
Maintennace
Filter cartridge is the main part of filtering impurities and
pollutants in water, which needs to be cleaned and replaced
regularly.Cleaning cartridge cycle is usually 3-6 months, replace
the cartridge cycle for 1-2 years.
Regularly check the valves and pipelines of the water softening
equipment to ensure its normal operation and no leakage.
Pay special attention to the connection of the pipeline to ensure
that there is no leakage or rupture of the pipeline.
Water softening equipment needs to be connected to the power supply
to operate normally, so you need to regularly check the power cord
and plug to ensure that the power cord is not broken or aging.
Regularly check the control parameters of the water softening
equipment, such as the ratio of brine, salt recovery rate, etc.,
and adjust them according to the actual situation.
When the salt tank is not used for a long time, clean the remaining
salt liquid in the department, and add lubricating oil in the
rotary valve and transmission parts to prevent the equipment from
rusting.
When the water softening equipment is working, the relay time
cannot be adjusted, and the equipment can be repaired or scrubbed
only after power failure.
Try to avoid collision between the exchange columns, and after the
equipment is in place, fix the motor bolts, switch bolts, wiring
bolts, etc. once more to avoid accidents when the equipment is
running.
Product Display
